How To Set Combination On Cannon Safe

Cannon Safes Customer Service - Logo

Cannon Safes are some of the well-nigh popular safes. Our resources page provides you with Cannon Safe Customer Service contacts, frequently asked questions from our customers, and resource guides.

Cannon Safes Client Support | Cannon Rubber Technical Back up

Cannon Safes Customer and Technical Support can be contacted at:

Phone: (847) 665-1635
Email: contactus@cannonsafe.com
Website: https://www.cannonsafe.com/
Address:2895 W. Capovilla Avenue Suite 140
Las Vegas, Nevada 89119
Hours of Functioning:
Monday to Friday, from half-dozen am to four pm PST (excluding major holidays)

Cannon Safes Customer Service - Garage location

Is the door of the safe removable to make it easier to move?

For added security, the door is not removable on Cannon Safes.

Practice Cannon Safes accept key backups?

For added protection, Cannon Safes are non equipped with a cardinal backup.

What size are the knockout holes in the dorsum of the rubber and how many are there?

The size of the knockout is ½ inch and in that location is only one pigsty. Every Cannon Safe model comes with a knockout. If you decide to use it for any reason please be conscientious not to alter the pigsty in any style as information technology may void your warranty and damage the integrity of the condom.

There is a small hole in the dorsum of my safe. What is information technology for? Does it effect the burn rating?

This is a knockout that allows yous, if you lot so cull, to run your own electrical through to the safe then you can apply dehumidifiers or lights that require ability. This does not issue fire rating, equally long as the pigsty is not altered in whatever way.

Do I lose my combination if I change the bombardment or if the battery dies?

No, your combination is stored within the locks calculator and volition not be afflicted if you alter the battery or if the battery dies.

When utilizing the knockouts in the back of the condom how does it retain fire protection?

The knockouts are small plenty that they will not be an consequence if a fire event occurs. Every bit added protection though, Stack-On offers an installation kit which includes seal that expands for extra protection.

Is in that location a fill-in manner to get into the safe if my batteries die?

For added security there is no other way to get into the safe. However, the battery compartment is located on the outside of the safe so you tin can still alter the bombardment and regain access to your safe, fifty-fifty if it dies. The combination will remain the same.

What is the combination of my new condom?

The manufacturing plant combination for Cannon Safes is ane-ii-3-4-5-6

Is there an option to install a power outlet in the rubber so I can utilise a dehumidifier or lights?

The only Cannon Safe model that comes with a built-in power supply is the Cannon 1965 premium model. However, all Cannon Safes come with knockouts in the back to allow for the wiring of electrical systems to utilise with lights or dehumidifiers. When using the knockouts be conscientious non to make them any bigger. This tin can void your warranty and compromise the integrity of the safe. We also have cordless dehumidifiers and low-cal kits available.

Cannon Safes Customer Service - Open Safe

How does the silica gel dehumidifier work?

When the indicator beads plough pink, the silica gel is saturated and needs to be reactivated. To reactivate the beads, identify the entire unit (do not disassemble) in the oven at 325 Fahrenheit for at least 3 hours. Let the unit cool enough to handle, and so render to the safety. Note: the indicating beads will gradually plow blueish once reactivated.

What is the proper way to accept a prophylactic delivery?

How often should I alter my bombardment?

The frequency that you will have to change your bombardment varies past user. If you use your rubber multiple times a day you may have to alter your battery more than frequently than someone who uses the condom three times a week. Only to be safe, we suggest changing the battery of your condom twice a year.

What kind of battery should I use?

We recommend using an all element of group i Duracell or Analeptic battery with an expiration date of five years in the time to come. This will ensure optimal lock performance.

How practise I use an electric dehumidifier in a safe without a power outlet?

An culling option to an electric dehumidifier is our silica gel dehumidifier, which does non need electricity to operate.
If you prefer the electrical pick, Cannon Safes come up with knockouts in the dorsum to allow for the wiring of electrical systems to apply with lights or dehumidifiers. When using the knockouts be careful not to brand them whatsoever bigger. This tin void your warranty and compromise the integrity of the safe.

Where are Cannon's safes manufactured?

Cannon Safes are made and manufactured in Mexico.

How long does the "lock-out mode" terminal?

Lock-out mode lasts five minutes. Refrain from pushing buttons while the battery connects or the timer will reset.

What size screws or anchors should I use to bolt my unit to the floor?

We recommend using Cherry-red Head 3/eight inch 10 3-3/iv inch concrete wedge anchors.

Can I upgrade my digital keypad to EMP?

No, the wiring configuration in the digital keypad is different when compared to the EMP lock.

Can I supplant the digital keypad with a mechanical lock?

Digital locks provide secure and fast access to your valuables. Safes with digital keypads cannot support a mechanical lock considering they lack specific features to guarantee protection.

Does my warranty cover me if I lost the combination to my safety?

The warranty does non embrace lost or forgotten combinations, improper opening procedure, and weak or dead batteries. Electronic and EMP locks carry a i-twelvemonth warranty for labor and a lifetime warranty for parts.

What should I practise if my prophylactic experiences fire, flood, or burglary?

Delight call us at (702) 910-2400 ext. 774 and explain the state of affairs. We will enquire for certain information to procedure the merits simply rest assured knowing your Cannon Rubber is covered for the lifetime of the safe if you lot experience one of the unfortunate events mentioned above.

What if the paint on my safety is damaged?

Paint comes with a one-year warranty, depending on proper care and environment. If you lot demand assistance with paint warranty please phone call us at 800-242-1055.

Where tin I find the model number for my safe?

You tin can find the model number for you lot rubber on the door of the safe.

Where tin I discover the series number for my safe?

Find the serial number on the correct, outside body wall of the safe, in the upper front corner. The serial number will be on a small silver sticker.

What do I practice if my condom didn't come with a Combo card?

Your rubber must be equipped with an EMP lock to receive a combo carte du jour. This lock comes on our Cannon 1965 Premium Model. For more information or to place an order for a Philharmonic Menu please telephone call customer service at 702-910-2400 ext. 772.

Where can I find an Owner's Transmission for my condom?

Hither you will detect a PDF version of the original owner's transmission shipped with your safe. Within it, y'all should be able to detect answers to most of your questions.. Delight have a moment to read the manual to get a full agreement of all the features associated with your Cannon Safe.

How do I reactivate my Silica Gel Dehumidifier?

When the indicator beads turn pink, the silica gel is saturated and needs to be reactivated. To reactivate the beads, place the entire unit (practise non disassemble) in the oven at 325 Fahrenheit for at least 3 hours. Let the unit cool enough to handle, and then return to the prophylactic. Note: the indicating beads will gradually turn bluish once reactivated.

Question: How exercise I buy extra shelves?

Download the Shelf Order Course. Looking at the image beneath, determine which shelves yous need. Keep in mind that we no longer make shelves for past models. To produce and ship the shelves information technology volition take approximately 5-viii weeks.

If you lot take any questions please contact customer service at (702) 910-2400 ext.772.

Cannon Safes Customer Support - Shelving

How to change the battery on a SecuRam Keypad

If possible, unlock the condom and leave the door open throughout the next steps. (It is always good practice to have the rubber door open when working with the lock or keypad.)

Twist the keypad ring clockwise and pull off
Pull out the bombardment plug-in and connect the battery
Slide the bombardment into the tray. Put the ring back onto the keypad and twist counter clockwise
Examination the combination before shutting door

How to change the battery for NL Keypads

Unlock the prophylactic and leave the door open throughout the next steps.

Locate the battery tray on the bottom of the keypad
Slide the door open and pull out battery plug-in
Connect the bombardment and slide the battery into the tray

Close the latch and exam combination earlier shutting safe door

How to resetting locks to mill setting for NL Keypads

Note, you will need the MRC code to practise this. This is a number that is bachelor only through the manufactory, please meet "How practice I go my MRC Code" if you demand help.

Open up the safe using the MRC code. Get out the prophylactic door open up and in the locked position (locking bolts should exist visible).

Printing and agree 3 until you hear a double beep.
Enter the MRC; you should hear a double beep.
Press and Concur 1 until you hear a double beep.
Enter the MRC; y'all should hear a double beep.
Enter the desired code (Factory code is 1-ii-3-4-5-6); you should hear a double beep.
Re-enter the desired code (Factory code is one-2-three-4-5-6); you should hear a double beep.
Exam the combination with the door open to make sure the combination was accepted.

How to alter the lock code on NL Locks

You will know yous have a NL Lock if your safe has this keypad:

Programming Instructions

Enter the existing six (6) digit code (for new safes, preset code is 1,2,3,4,5,6), plough handle counter-clockwise and pull door open up.
With the door pulled open, put the safe in the locked position past turning the handle clockwise. You should be able to see the protruding bolts on the safe door.
If in that location is one (1) long beep after entering the code, the lock did not recognize the code, tedious down.

Press and hold "0" until yous hear a double beep.

Enter existing six (6) digit lawmaking (for new safes, preset code is 1,2,3,4,five,half dozen). You will hear a double beep.

Choose and enter a new vi (6) digit lawmaking. You volition hear a double beep.

Re-Enter new six (6) digit code. You volition hear a double beep.If you hear a long beep, the old code is still valid.

With the safe door open, exam the new combination. If yous have any bug telephone call united states of america at 800-242-1055 EXT 771

Congratulations! You take changed your safe combination. At present don't forget it because you volition demand information technology if you want to change the combination again!

How to change the lock code for SecuRam Locks

You will know you have a SecuRam Lock if your safe has this keypad:

Programming Instructions

Enter the existing six (half-dozen) digit code (for new safes, preset lawmaking is one,2,three,four,v,6), plow handle counter-clockwise and pull door open.
With the door pulled open up, put the safe in the locked position past turning the handle clockwise. You should be able to run into the protruding bolts on the safe door.
If in that location is i (1) long beep later on entering the code, the lock did not recognize the lawmaking, deadening downward.

Press "0" half dozen times, you will hear a double beep.

2. Enter existing half dozen (6) digit code (for new safes, preset code is 1,two,3,4,five,6). You will hear a double beep.

3. Select and enter a new six (six) digit code. You will hear a double beep.

4. Re-Enter new six (6) digit code. You volition hear a double beep.
If you hear three beeps, the old code is withal valid.

5. With the safe door open up, exam the new combination.

If you accept any bug call us at 800-242-1055 EXT 771.

Congratulations! You accept inverse your safe combination. At present don't forget it because you will need it if you desire to modify the combination once again!

How to change the lock code for Southward&One thousand Locks

Y'all volition know you take a S&G Lock if your safe has this keypad:

Notation, there are two sets of instructions listed beneath; ane is for changing the Administrator Code and the other for irresolute the User Codes.

Administrator Lawmaking: it is required when changing or adding additional user codes.
User Code: used for people with additional admission to your safe. You have up to 8 user codes.

Programming Instructions for Administrator

Enter the existing six (6) digit code (for new safes, preset code is 1,2,3,4,5,6), turn handle counter-clockwise and pull door open up.
With the door pulled open, put the safe in the locked position by turning the handle clockwise.
You should be able to see the protruding bolts on the safe door.
If there is ane (1) long beep after entering the lawmaking, the lock did non recognize the code, slow down.
Printing "7" and so "iv", then "*".

Enter your electric current 6 digit code then press"#". Y'all will hear three beeps.

Press "1" then "*".

Select and enter a new six (vi) digit code. You will hear three beeps.

Re-enter a new six (6) digit code. Y'all volition hear 3 beeps.

If you hear a long beep, the old code is all the same valid.

With the safety door open, exam the new combination.

If you take whatsoever bug call the states at 800-242-1055 EXT 771

Congratulations! You accept changed you Administrator Lawmaking. At present don't forget it because you lot volition need it if yous desire to modify the User Codes!

Programming Instructions for Users

Enter the existing six (half-dozen) digit lawmaking (for new safes, preset code is 1,2,3,4,5,6), turn handle counter-clockwise and pull door open.
With the door pulled open, put the safe in the locked position by turning the handle clockwise.
You should exist able to run across the protruding bolts on the safe door.
If at that place is one (1) long beep after entering the code, the lock did not recognize the code, slow downward.

Press "7" then "4", then "*".

Enter the Admin Code so press"#". Yous will hear three beeps.

Press the user number you are trying to change/add (two-9) then "*".

Select and enter a new six (6) digit code. You volition hear 3 beeps.

Re-enter a new half-dozen (half dozen) digit lawmaking. Yous will hear three beeps.

If you hear a long beep, the old code is notwithstanding valid.

With the safe door open, examination the new combination.
If you have any issues telephone call us at 800-242-1055 EXT 771

How to alter the lock lawmaking on Kaba Locks

You will know you accept a Kaba Lock if your safe has this keypad:

Programming Instructions

Enter the existing six (6) digit code (for new safes, preset code is 1,two,3,iv,5,six), plough handle counter-clockwise and pull door open up. With the door pulled open, put the safe in the locked position past turning the handle clockwise. You should be able to see the protruding bolts on the rubber door.
If there is one (1) long beep afterward inbound the code, the lock did not recognize the code, ho-hum downward.

Press "#" the "1" hear a double beep

Enter existing six (six) digit code (for new safes, preset code is 1,ii,three,iv,5,6). You will hear a double beep

Select and enter a new vi (6) digit code. You will hear a double beep.
Re-Enter new 6 (6) digit lawmaking. You lot will hear a double beep.

If you hear 3 beeps, the onetime code is still valid.

With the condom door open up, test the new combination.

If y'all have any bug telephone call united states of america at 800-242-1055 EXT 771
Congratulations! Y'all have changed your condom combination. Now don't forget it because you will need it if yous want to change the combination once more!

I hear two beeps but my rubber will not unlock, what does this hateful?

Cheque the bombardment. We recommend using an Analeptic or Duracell battery that is 100% Alkaline, no lithium, non-rechargeable battery, and with an expiration date of 5 years in the future.
Likewise, attempt turning the handle to the right, without letting go of the pressure, put in the lawmaking, then turn information technology to the left. Once you hear the 2 beeps your safe should open.
Note: If your safe notwithstanding doesn't open, call client service (702) 910-2400 ext.771.

My safe will not lock, what do I do?

Verify that your batteries work. The all-time battery to apply is a Duracell or Energizer bombardment with an expiration date of five years in the future. If the batteries have been in the safety for more than 6 months, change them and try opening and closing the rubber over again.
Note: If your safe withal doesn't open, call client service (702) 910-2400 ext.771.

What do I do If I lost my combination?

If you lost the combination to your Cannon Prophylactic please fill out this course . After y'all fill out the form our Client Service team will check to meet if the Chief Reset Lawmaking is available for your safe. Filling out the form mentioned higher up does non guarantee that our squad volition be able to assist you in gaining access to your safe. Master Reset Codes are not available for all safes but nosotros volition practise our best to assistance y'all. Once our Client Service department reviews the information nosotros volition be in touch via email with next steps.

How do I open the safe if the handles are in the inside?

To open the safety, nosotros recommend putting a Phillips-Head screwdriver into one of the holes of the hub and turning it to the right without letting go of the pressure. Put in the code then turn information technology to the left. When yous hear 2 beeps your safety volition open.

Where are the handles of my safe?

The handles are within of the rubber in a white box. This box also contains the 4 Floor plugs and 7 shelf clips.

What do I do if my condom did not coming with a Warranty Certificate?

To receive a warranty certificate please give a phone call to customer service (702) 910-2400 ext.772 and we will identify an order to transport this out to you.

My condom did non come with an Possessor's Transmission. How do I go one?

Here you will observe a PDF version of the original owner'southward transmission shipped with your safety. Within it, you should be able to discover answers to most of your questions.. Delight accept a moment to read the manual to get a total understanding of all the features associated with your Cannon Condom.